It is a highly innovative product guaranteed by our technologies & Quality.

It is nice looking & easy to adopt with your existing house wiring.

Support All Android Mobile’s.

Android Apps will be free.



The WiFi QBitronics switch  ON / OFF and Fan Regulator can be controlled from remotely using android app or supporting wifi enabled devices .This switch can be used control light , FAN, power socket ,  Triac dimming enabled LED’s and any other remote  ON / OFF  or dimming application.


ALL ON/OFF: All Lights and Fan ON and OFF    

1,2,3 AND 4: Each Lights ON/OFF                                                                        

FAN ON/OFF with 0-100-Speed variable Fan Control                                              

+: Increment each speed up to 100 by sliding

– : Decrement each speed up to 0

You Can Connect The Load Up-to 150 Watts of Each Point.

Operating Voltage: 230AC/50HZ

#- Read the ON/OFF Status from all Lights to Display on the Mobile

*- Scene for Future Use


  • On/Off  and Regulator control.
  • Snubber circuit enable.
  • Accurate firing angle control and smooth dimming.
  • Operating Voltage 3V3 DC.
  • Isolated power section from the input.
  • 0-100% dimming.
  • WiFi Enabled.
  • Typical Power handling upto 1500Watts.


ESP8266 ESP-01 Specifications:

  •  11 b/g/n
  •   Wi-Fi Direct (P2P), soft-AP
  •   Integrated TCP/IP protocol stack
  •   Integrated TR switch, balun, LNA, power amplifier and matching network
  •   Integrated PLLs, regulators, DCXO and power management units
  •   +19.5dBm output power in 802.11b mode
  •   Power down leakage current of <10uA
  •   Integrated low power 32-bit CPU could be used as application processor
  •   SDIO 1.1/2.0, SPI, UART
  •   STBC, 1×1 MIMO, 2×1 MIMO
  •   A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  •   Wake up and transmit packets in < 2ms
  •   Standby power consumption of < 1.0mW (DTIM3).


BTA12 Triac Features:

  • Blocking Voltage to 800 V
  • On-State Current Rating of 12 A RMS at 25°C
  • Uniform Gate Trigger Currents in Three Quadrants
  • High Immunity to dV/dt − 1500 V/s minimum at 125°C
  • Minimizes Snubber Networks for Protection
  • Industry Standard TO-220AB Package
  • High Commutating dI/dt − 1.5 A/ms minimum at 125°C
  • Internally Isolated (2500 VRMS)
    • Screen Shots:


    Screenshot_20160228-154436 Screenshot_20160228-154510Screenshot_20160228-154524 Screenshot_20160228-154510 Screenshot_20160228-154552

    • NOTE:This module directly establish the wifi connection with mobile and then controls the relays and to establish the connection with wifi router


    When Login Please Enter the IP Address and Port ID from the Receiver Control Unit Label at the first time only.

    * You have to connect one device for Each Point only. Don’t please connect each point to more than one Lights/Fan unit will get damaged.